THPW1000 - Professional Grade Pure Sine Wave Power Inverter Install Kits

THPW1000 Watt Pure Sine Wave Inverter, DC Power Cable, Fuse with Fuse Holder, Lugs, TH001 Remote, Isolator

THPW1000 KIT1

$ 449.99



THPW1000 KIT2

$ 465.99



THPW1000 KIT3

$ 493.99

The Thor Inverter kits has remote switch, wiring lugs and 2 10 ft lengths of 1/0 power cable. It’s easy and quick to Install.

Professional Grade Pure Sine Wave Inverter Kits comes with the proper size wiring. It cost more but in the long term, they are more cost effective. It can run just about all appliances, can be used on regular basis, and produce less heat.

DriverLogBooks recommends that you consider Kit 2, unless you have a 100 Amp fuse to protect wiring and Inverter from possible shorts. Kit 3 also includes a Thor battery isolator which will keep your main starting battery from being drained, should battery voltages drop below 12.7 volts.

Features

  • Continuous 1,000 Watts (83 Amps), 2,000 Peak
  • Pure Sine Wave Inverter
  • Professional Grade Install Kit
  • 2 10 ft of 1/0 Power Cable
  • TH001 Remote
  • 4 - 6 Lugs
  • 100 Amp fuse (Kit 2 & Kit 3)
  • 80 Amp isolator (Kit 3)
  • Gross Weight: 15 lbs.
  • Net Weight: 14.5 lbs.
  • Dimensions:
    • 20" H x 14" W x 8" D
  • Warranty: 2 Years

Other Features

  • Best Efficiency
  • High Quality & Performance
  • Highest Safety Level
  • Advanced Technology
  • Prevent Overheating
  • Low Maintenance
  • Compact and Strong
  • Plug & Play design
  • Allows Connection from Power Inverter to Battery Bank
  • Professional looking for Superior Performance
  • Avoid Added Maintenance Costs or Damages

Kit 1 Includes

  • Continuous 1,000 Watt THPW1000 Pure Sine Wave Power Inverter
  • 2 - 10 ft. of 1/0 cable
  • TH001 Remote
  • 4 - Wiring Lugs

Kit 2 Includes

  • Continuous 1,000 Watt THPW1000 Pure Sine Wave Power Inverter
  • 2 - 10 ft. of 1/0 cable
  • TH001 Remote
  • 6 - Wiring Lugs
  • 100 Amp fuse

Kit 3 Includes

  • Continuous 1,000 Watt THPW1000 Pure Sine Wave Power Inverter
  • 2 - 10 ft. of 1/0 cable
  • TH001 Remote
  • 6 - Wiring Lugs
  • 100 Amp fuse
  • 80 Amp Isolator

Installation Diagram

Installation Diagram
  1. Connect Cables included with the kit to the back of the inverter
  2. Connect Cables included with the kit to your battery or power source. (Battery not included)
  3. Turn your THOR inverter ON using the ON/OFF switch or remote

Battery Isolator Wiring Diagram

Battery Isolator Wiring Diagram


Back to Top
Thor Inverter Intall Kits
Back to Truck Products



Highly Recommended